STM32F105 Development Board
This STM32f105 Development Board is designed to provide an economical development environment for CAN communication, I2C, SPI, UART and parallel communication. This board integrated with STM32CUBEMX.
Operational Requirements:
To communicate with STM32f105 Board, the following hardware and software requirements:
- PC-compatible system with Windows® 7 or Window 10 (32-bit/ 64 bit Operating Systems).
- POWER supply of 9-12V DC / 1A
- STM32CUBEMX with ARM toolchains
Running and Debugging Applications
The following procedure to build, run, and debugs the STM32f105R8 board
- 1. Use STM32f105cubemx to configure the I/O pins and to generate the initialization C code
- 2. Use keil uvision 5 software to edit the program as you need, add the header files and compile the program.
- 3. Build the project by selecting Project > Build All.
- 4. Plug-in Power supply to board, Make sure Supply should provide 1A supply.
- 5. Connect a ST-link v2 Debugger to the program header.
- 6. Connect the ST-link v2 USB port to PC using a USB cable.
- 7. Choose the hex file generated in ST-utility app by selecting Debugger > Select Tool.
- 8. Download your code into the board by selecting program and click Run option to debug the code In to Board
- REFER Online FOR Visual Understanding
Features
The board offers many unique features
- The STM32f105 Development board comes with Flash program memory, up to 256 Kbytes, Data SRAM up to 64 Kbytes (includes 2 Kbytes of DMA RAM)
- 8.0000 MHz crystal for maximum execution speed and standard serial bit rates - Phase-locked loop (PLL) multiplies frequency upto 72MHz.
- 32.768kHz RTC crystal
- Onboard Peripherals
- 2x16 character LCD with background light
- 3 No’s LEDs(active Low)
- 3 No’s Push Button(Active Low)
- 1 No’s Potentiometer (POT) for Analog Input of 3.3V
- Two layer PCB (FR-4 material) for better noise immunity.
- EEPROM on SPI bus
- Buzzer
- Reset button
- On Board ECAN interface (2 Channels)
- ECAN Transceiver - TJA1040 -2 No’s
- UART- With Handshaking (by MAX232) - 1 No’s
- JTAG Interface, for in-circuit programming.
- SWD - Supports In-Circuit Serial Programming for flash programming and debugging.
- Dimensions: 130 x 130 mm
