STM32F405
Embedded Automotive Board
Rev Up Your Automotive Projects with VAct STM32F405
Development Board: Precision Control, Ultimate Reliability,
and the Fast Lane to Innovation!
STM32F205
Development Board
This STM32f205 Development Board is designed to provide an economical development environment for CAN communication, I2C, SPI, UART and parallel communication. This board integrated with STM32CUBEMX.
VAct EmbCore Development Board
VAct AutoEdge Development Board is based on STM32f205 designed to provide an economical development environment for CAN communication, I2C, SPI, UART and parallel communication. This board integrated with STM32CUBEMX.
Operational Requirements:
To communicate with STM32f205 Board, the following hardware and software requirements:
- PC-compatible system with Windows® 7 or Window 10 (32-bit/ 64 bit Operating Systems).
- POWER supply of 9-12V DC / 1A
- STM32CUBEMX with ARM toolchains
Running and Debugging Applications
The following procedure to build, run, and debugs the STM32f205R8 board
- 1. Use STM32f205cubemx to configure the I/O pins and to generate the initialization C code
- 2. Use keil uvision 5 software to edit the program as you need, add the header files and compile the program.
- 3. Build the project by selecting Project > Build All.
- 4. Plug-in Power supply to board, Make sure Supply should provide 1A supply.
- 5. Connect a ST-link v2 Debugger to the program header.
- 6. Connect the ST-link v2 USB port to PC using a USB cable.
- 7. Choose the hex file generated in ST-utility app by selecting Debugger > Select Tool.
- 8. Download your code into the board by selecting program and click Run option to debug the code In to Board
- REFER Online FOR Visual Understanding
Features
The board offers many unique features
- The STM32f Development board comes with Flash program memory, up to 1 MB, Data SRAM up to128+4 Kbytes.
- 8.0000 MHz crystal for maximum execution speed and standard serial bit rates - Phase-locked loop (PLL) multiplies frequency upto 120 MHz max
- 32.768kHz RTC crystal
- Onboard Peripherals
- 4x20 character LCD with background light
- 10 Digital I/O’s
- 2 No’s Potentiometer (POT) for Analog Input of 3.3V
- 1 N0’s OLED 0.9inch on I2C bus
- HAL Driver Interface for industry standard learning
- EEPROM on SPI bus
- On Board ECAN interface – 2 No’s
- Buzzer
- ECAN Transceiver -2 No’s
- UART on RS 232 - 1 No’s
- UART on RS 485 - 1 No’s
- SD Card interface
- USB interface
- JTAG Interface and SWD - In-Circuit Serial Programming for flash and debugging
- Eclipse based CubeIDE, ARM Tool Chains (GCC & GDB)
