STM32F405
Embedded Automotive Board
Rev Up Your Automotive Projects with VAct STM32F405
Development Board: Precision Control, Ultimate Reliability,
and the Fast Lane to Innovation!
STM32F205
Development Board
This STM32f205 Development Board is designed to provide an economical development environment for CAN communication, I2C, SPI, UART and parallel communication. This board integrated with STM32CUBEMX.
Training Kit for Automotive Fratinity
Arm® Cortex®-M4 32b MCU+FPU, 210DMIPS, up to 1MB Flash/192+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera
Overview
VAct AutoEdge Development Board based on STM32 designed & developed in-house by VAct Technologies for advanced learning driver development, HAL. The board has STM32F405RGT6 ARM Cortex M4 as its core integrated with STM32 CubeIDE & GNU ARM toolchain. The solution enables automotive enthusiasts and aspiring engineers to take up a career in the automotive domain.
Operational Requirements:
To communicate with STM32F405 Board, the following hardware and software requirements:
- PC-compatible system with Windows® 7 or Window 10 (32-bit/ 64 bit Operating Systems).
- POWER supply of 9-12V DC / 1A
- STM32CUBEIDE with ARM toolchains
CAN | CANopen | UDS | RTOS
The Board includes peripherals like RTC, ADC, I2C, SPI, CAN, PWM, Timers, UART, and RS485, SD card & USB support. OLED is interfaced using I2C protocol. Our Development kit comes with the following features :
- Low-footprint CAN stack
- Low Footprint CAN open
- Free RTOS Stack
- UDS Porting (In Progress)
- More than 75+ experiments
- 25+ Assignments / Problems for learning
Features
The board offers many unique features
- The STM32f Development board comes with Flash program memory, up to 1 MB, Data SRAM up to192+4 Kbytes.
- 8 / 16 MHz crystal for maximum execution speed and standard serial bit rates - Phase-locked loop (PLL) multiplies frequency upto 168 MHz max
- 32.768kHz RTC crystal
- Onboard Peripherals
- 16x2 character LCD with background light
- 10 Digital I/O’s
- 2 No’s Potentiometer (POT) for Analog Input of 3.3V
- 1 NO’s OLED 0.9inch on I2C bus
- HAL Driver Interface for industry standard learning
- EEPROM on SPI bus
- On Board ECAN interface – 2 No’s
- Buzzer
- DAC pinouts 2 No's
- UART on RS 232 - 1 No’s
- UART on RS 485 - 1 No’s
- SD Card interface
- USB interface
- JTAG Interface and SWD - In-Circuit Serial Programming for flash and debugging
- Eclipse based CubeIDE, ARM Tool Chains (GCC & GDB)
